Atlantis Semi-Auto 4.0 ATLANTIS SEMI-AUTO 4.0 is the portable system for spraying thermoplastic powders with dual mode of use flame spray and flock spray, in the semi-automatic version, which includes:FLOCK-SPRAY EQUIPMENT: for electrostatic spraying in the manual mode, fitted with fluidized bed tank and electrostatic gun. Power supply 220 V Frequency: 50 Hz FLAME SPRAY SYSTEM, SEMI-AUTOMATIC, equipped with: Mobile trolley with large pneumatic wheels. Quick connection. 9 m hoses + 6 m extension hoses. Fixed controls on the machine frame and electrical cabinet. Stainless steel tank. Flame Spray Application Gun with automatic flame ignition device, available in several versions according to the coating purpose (metal, concrete and other porous substrates) and in various sizes/types. 4.0 EQUIPMENT: electrical panel with interconnection electronic card and modem, temperature-measuring pyrometer with 9 m connection cable. Centurion Application Guns All IBIX FS 4.0 models are equipped with one or more of the following APPLICATION GUNS Centurion Centurion Large Centurion for concrete surfaces Models available – With handle and trigger for coating of metals – Straight handle and heat exchanger for concrete Size options Medium or Large Spray pattern 14 cm (with LARGE guns) Flame ignition system Automatic MAXI HI-TECH GUNS MAXI HI-TECH Metal MAXI HI-TECH Concrete Models available – With handle and trigger for coating of metals – Straight handle and heat exchanger for concrete Size options Medium or Large Spray pattern 30 cm Flame ignition system Automatic Specific features of the several units IBIX FLAME SPRAY INDUSTRY VERSION 4.0 Requirements Pneumatic supply + single phase power supply. * Note: if a data is not entered, the system will NOT get stuck Connectivity Modem + SIM Data for working on-site (no LAN line). IBIX Flame Spray IBIX FLAME SPRAY system fitted with electrical panel with electronic card and modem for interconnection. Control Device The IBIX FS 4.0 equipment will receive the recipe / order data from the company computer or tablet *. All IBIX FS 4.0 models come supplied with the following A contact probe for detecting the pre-heating T ° of the substrate to be coated, with storage of the last measured value. In addition, the machine includes an infrared thermometer to be used during the flame spray application of thermoplastic powders. REMOTE CONTROL IBIX FS 4.0 is fitted with a WiFi Access Point. Each IBIX FS 4.0 machine can be managed using a web interface accessible from devices with WiFi connection: smartphone, tablet, PC. Once connected, you can access the control interface through the web. From the panel it is possible to check all the processing data, such as: Controls and transmissible Data Remote controlled on / off Sending of “recipe – work order” with some project data: Date Name / definition of the project Name of the client Surface type: metal or non-metal (concrete, ceramic, fiberglass, other) Type of powder to use Use of primer? YES – NO Thickness of the coating according to specifications Sq meters to be covered Data forwarded from the machine to the CLOUD Work start time Work end time Processing time Number of stops Substrate temperature prior to the coating cycle Pre-heating temperature / s detected Last pre-heating temperature detected Data previously entered manually by the operator: Thickness of the coating performed Kg of primer used Kg of powder used Kg of gas used Further data transmitted from the device to the Cloud and downloadable from the company computer Gas flow adjustment / setting from smartphone Adjustment / setting of operating air pressure Gas flow value during processing Air pressure value during processing Geo-location of the machine Notes (short text of 120 characters) By consulting the database, you will also see the following values: Total number of starts / stops Total working time of the machine GET IN TOUCH! Discover and stay updated on OUR NEWS and PROMOTIONS Contact US! Documents IT IBIX Industrial ATLANTIS 4-0 EN IBIX Industrial ATLANTIS 4-0
